Calcium Slayer & Flush (CS & F)

Rising above conventional thought, Lehman created a powerful and responsible roller cleaning system. Calcium Slayer & Flush. Safe and effective is no longer heresy.

Procedures for using Calcium Slayer – STEP 1

• Remove all ink from press rollers.
• Isolate ink train from plate cylinder. Don’t drop the forms.
• With the press stopped, apply a single 1/4″ wide bead of pink Calcium Slayer to the ink roller train.
• Start the press and allow to run through the ink roller train for 2-3 minutes.
• Do NOT rinse Calcium Slayer.
• Proceed directly to Flush (Step 2) application.

Procedures for using Flush – STEP 2

• With the press stopped, apply a single 1/4″ wide bead of blue Flush to the ink roller train.
• Start the press and allow to run through the ink roller train for 2-3 minutes.
• Apply liberal amounts of clean, hot water to the ink roller train until flush and contaminants are purged from the rollers. Finish with usual press wash procedure.

Heads-Up:

When used as prescribed, Calcium Slayer & Flush will remove an abundance of calcium, ink, paper lint, and other debris from the ink train rollers. Weekly use is recommended.

Initial usage may require multiple applications to remove all build-ups.

Warnings:

Read all product directions carefully and adhere to them at all times. Use of protective eyewear is suggested. If eye contact occurs, rinse thoroughly with clean water. May sting on open sores, cuts or around fingernails. The use of nitrile gloves is suggested. Keep out of reach of children. Do not leave on metal surfaces for extended periods of time. If contact with metal occurs, wipe and rinse thoroughly with clean water.

IMPORTANT: Calcium Slayer & Flush were designed to be used as a two-step roller cleaning system. Do NOT use separately or in reverse order. Follow only our prescribed procedures. Lehman Inc., or its authorized agents, will assume no responsibility for improper usage of the products.